Skip to main content
Version: 6.x (Latest)

Configure File Synchronization

File sync in DevSpace establishes an ultra-fast sync connection between your local filesystem and your dev container and makes sure that all both filesystems are always in sync depending on which folders you map inside the dev section of devspace.yaml.

Think kubectl cp on Steroids

You can think of the file sync in DevSpace as a much faster and smarter version of kubectl cp that continuously copies files whenever they change.

When starting the development mode by running start_dev inside a pipeline, DevSpace starts the file sync as configured in the dev.*.sync section of the devspace.yaml.

devspace.yaml
deployments:
my-deployment:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
app:
imageSelector: ghcr.io/org/project/image
sync:
# Map the local path "./" (= local working directory / project root) to the container path "/app"
- path: ./:/app
excludePaths:
- node_modules/
# Map the local my-file.txt from the user home directory into the container
- path: "${DEVSPACE_USER_HOME}/my-file.txt:/user/my-file.txt"
file: true # Signal DevSpace this is a single file
Start Sync Only

To only start the file sync without the other functions of the development mode, use a custom pipeline or run the devspace sync command.

Sync Path Mapping

The following snippet shows a file sync configuration with 3 different path mappings:

devspace.yaml
dev:
app:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./ # Map local working directory $workdir to remote working directory $remoteWorkdir
- path: my-folder:/tmp # Map local $workdir/my-folder to remote folder /tmp
- path: my-folder # Map local $workdir/my-folder to remote $remoteWorkdir/my-folder

Exclude Paths Inline

The config options for excluding paths use the same syntax as .gitignore.

note

An exclude path that matches a folder recursively excludes all files and sub-folders within this folder.

The excludePaths option expects an array of strings with paths that should not be synchronized between the local filesystem and the remote container filesystem.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
excludePaths:
- logs/
- more/logs/
uploadExcludePaths:
- node_modules/
downloadExcludePaths:
- tmp/

Explanation:

  • Files in logs/ and in more/logs/ would not be synchronized at all.
  • Files in node_modules/ would only be synchronized from the container to the local filesystem, but not the other way around.
  • Files in tmp/ would only be synchronized from the local to the container filesystem, but not the other way around.

Example: Only Sync Specific Folders

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
excludePaths:
- '**'
- '!/my-folder-1/'
- '!/my-folder-2/'

Explanation:

  • All files will be excluded except those in folders ./my-folder-1/ and ./my-folder-2/

Exclude Paths From File

The excludeFile option expects a path to a file from which the exclude paths can be loaded. Once loaded, the behavior is identical to the excludePaths option. This is useful for sharing a common list of exclude paths between many components. The earlier example, Exclude Paths from Synchronization, can be converted to files as follows:

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
excludeFile: .gitignore
uploadExcludeFile: upload.gitignore
downloadExcludeFile: download.gitignore
info

This option is often useful if you want to download a dependency folder (e.g. node_modules/) for code completion but you never want to upload anything from there because of compiled binaries that are not portable between local filesystem and container filesystem (e.g. when your local system is Windows but your containers run Linux).

Start sync log

By default the sync log is disabled but it can be enabled with option printLogs: true.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
printLogs: true

Sync-Triggered Actions

Sometimes it is useful to execute commands after the sync uploads files/directories between the local filesystem and the container.

danger

Make sure that post-sync commands will not trigger a new sync process. This could lead to an endless loop.

Delay Container Start

The startContainer option can be used to delay starting a container until sync has finished uploading all files initially. This is very useful if your container entrypoint requires certain files. This option requires command to be set because otherwise DevSpace will not know which command to start your container with.

Example: Enable Container start

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
# required as DevSpace otherwise doesn't know
# what to start.
command: ["entrypoint", "to", "container"]
sync:
- path: ./
startContainer: true # Will start the container after sync is done
Multiple startContainer

If multiple sync paths with startContainer exist, DevSpace will wait for all to finish before starting the container. You can combine startContainer sync configurations and non startContainer configurations to customize when the container is actually started.

Restart Container

The restartContainer option expects a boolean which defines if DevSpace should restart the container every time either a single file or even a batch of files have been uploaded to the container using file sync.

Restart Helper Required

Setting restartContainer: true requires you to also set command: ["my", "container", "entrypoint"]. Otherwise, DevSpace will not know which command to restart.

When not to use this option

Using restartContainer: true is most useful if your application runs based on a compiled language and you are not using a framework or language specific tool which provides hot reloading capabilities. If you are using tools like nodemon or frameworks like React, Rails or Flask, they allow you to enable hot reloading which may be much faster than restarting the entire container. In this case you should disable restartContainer.

Example: Enable Container Restart

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
# required as DevSpace otherwise doesn't know
# what to restart.
command: ["entrypoint", "to", "container"]
sync:
- path: ./
onUpload:
restartContainer: true

Run Command

The onUpload.exec option defines command(s) that should be executed after DevSpace uploaded files and folder to the container. DevSpace will ensure that those commands are not executed while initially syncing the state, and command execution will also halt any syncing activities.

If this is defined together with onUpload.restartContainer, DevSpace will ensure that the commands are always executed before the container is restarted.

Example: Post-Upload Commands

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
onUpload:
# These post-sync commands will be executed after DevSpace synced changes to the container in the given order
exec:
- command: |-
npm install
onChange: ["./package.json"]
- command: |-
echo 123 > local.txt
local: true # Execute this command locally instead of in the container
- command: "touch abc.txt" # string | Command that should be executed after DevSpace made changes
args: [] # string[] | Optional args that will force DevSpace to not execute the command in a shell
failOnError: false # bool | If true, DevSpace will restart the sync if the command fails (default: false)
local: false # bool | If true, DevSpace will run the command locally instead of in the container (default: false)
onChange: ["package.json"] # string[] | Optional array of file patterns that will trigger this command
name: my-command # string | DevSpace will print this name instead of the command when executing

Initial Sync

Initial Sync Strategy

The initialSync option expects a string with an initial sync strategy. The following strategies are available:

mirrorLocal mirrors the local filesystem inside the container (default)

  1. deletes all files inside the conainer that are not existing on the local filesystem
  2. uploads all files which are existing on the local filesystem but are missing within the container
  3. resolves all file conflicts (different content on local filesystem than in inside the container) by preferring the file on the local filesystem (i.e. all files in the container will be replaced if they are different from on the local filesystem)

preferLocal is like mirrorLocal but skips step 1.

mirrorRemote mirrors the container files to the local filesystem:

  1. deletes all files on the local filesystem that do not exist inside the container
  2. downloads all files that exist inside the container, but are missing on the local filesystem
  3. resolves all file conflicts (different content on local filesystem than inside the container) by preferring the file within the container (i.e. all files on the local filesystem will be replaced if they are different than inside the container)

preferRemote is like mirrorRemote but skips step 1.

preferNewest merges local and remote filesystem while resolving all conflicts

  1. uploads all files which are existing on the local filesystem but are missing within the container
  2. downloads all files which are existing inside the container but are missing on the local filesystem
  3. resolves all file conflicts (different content on local filesystem than inside the container) by preferring the newest file (i.e. compares last modified timestamps and replaces all outdated files)

keepAll merges local and remote filesystem without resolving any conflicts

  1. uploads all files which are existing on the local filesystem but are missing within the container
  2. downloads all files which are existing inside the container but are missing on the local filesystem

disabled disabled the initial sync completely

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
excludePaths:
- node_modules/*
- path: ./node_modules/:/app/node_modules/
initialSync: preferRemote

Explanation: With this configuration, devspace dev performs the following tasks:

  • DevSpace would start port-forwarding and file synchronzation.
  • Initial sync is started automatically.
  • The first sync config section synchronizes all files except files within node_modules/. This means that during initial sync, all remote files that do not already exist locally are deleted, and other files are updated to the most recent version.
  • The second sync config section only synchronizes files within node_modules/. Because of initialSync: preferRemote, DevSpace downloads all remote files which are not present on the local filesystem and overrides all local files which are different than the files within the container.

Wait For Initial Sync

The waitInitialSync option expects a boolean which defines if DevSpace should wait until the initial sync process has terminated before opening the container terminal or the multi-container log streaming.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
waitInitialSync: false

Explanation: With the configuration devspace dev does the following:

  • DevSpace starts port-forwarding and file synchronization.

  • Initial sync would be started automatically.

  • Before the initial sync process is finished, DevSpace starts the log streaming.

Advanced

One-Directional Sync

These flags allow for local or remote container file systems to be ignored during synchronization.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
disableDownload: true

Bandwidth Limits

Sometimes it is useful to throttle the file synchronization, especially when large files or a large number of files are expected to change during development. The following config options provide these capabilities:

The bandwidthLimits options expect integer values representing the max file upload/download speed in KB/s, e.g. download: 100 would limit the file sync to a download speed of 100 KB/s.

note

By default, the file synchronization algorithm uses the maximum bandwidth possible to make the sync process as fast as possible.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
bandwidthLimits:
download: 200 # 200 KB/s
upload: 100 # 100 KB/s

Explanation:

  • Downloading files from the container to the local filesystem is limited to a transfer speed of 200 KB/s.
  • Upload files from the local filesystem to the container is limited to a transfer speed of 100 KB/s.

File Watchers vs Polling

By default, DevSpace uses inotify to detect changes. This can be more efficient, however, sometimes it might be unsupported or not feasible in certain situations, in which case, polling might be preferred.

Polling can help fix issues with file watchers. Enabling polling tells DevSpace to traverse over all watched files and folders periodically in the container to identify file changes.

deployments:
app-backend:
helm:
values:
containers:
- image: ghcr.io/org/project/image

dev:
my-dev:
imageSelector: ghcr.io/org/project/image
sync:
- path: ./
polling: true
info

Polling might increase CPU consumption of the container drastically, depending on the amount of files and folders watched

Disable File Watchers

If the noWatch option is specified, DevSpace will stop syncing after initially comparing and resolving differences. This is useful if you want a one-time sync, but then continue doing other steps in your pipeline.

FAQ

How does the sync work?

DevSpace establishes a bi-directional code synchronization between the specified local folders and the remote container folders. It automatically recognizes any changes within the specified folders during the session and will update the corresponding files locally and remotely in the background. It uses a small helper binary that is injected into the target container to accomplish this.

The algorithm roughly works like this:

  1. Inject a small helper binary via kubectl cp into the target container
  2. Run initial sync accoring to the initialSync config option
  3. Watch for file changes on both sides (local and remote) and sync them according to the sync path mappings
  4. After every sync process, restart the container or run other custom post-sync commands (optional)
Are there any requirements for the sync to work?

The tar command has to be present in the container, otherwise kubectl cp will not work and the helper binary cannot be injected into the container.

No server-side component or special container privileges for code synchronization are required, since the sync algorithm runs completely client-only within DevSpace. The synchronization mechanism works with any container filesystem and no special binaries have to be installed into the containers. File watchers running within the containers like nodemon will also recognize changes made by the synchronization mechanism.

Config Reference

sync required object[]

Sync allows you to sync certain local paths with paths inside the container

path required string

Path is the path to sync. This can be defined in the form localPath:remotePath. You can also use '.' to specify either the local or remote working directory. This is valid for example: .:.

Exclude Paths From File Sync

excludePaths required string[]

ExcludePaths is an array of file patterns in gitignore format to exclude.

excludeFile required string

ExcludeFile loads the file patterns to exclude from a file.

downloadExcludePaths required string[]

DownloadExcludePaths is an array of file patterns in gitignore format to exclude from downloading

downloadExcludeFile required string

DownloadExcludeFile loads the file patterns to exclude from downloading from a file.

uploadExcludePaths required string[]

UploadExcludePaths is an array of file patterns in gitignore format to exclude from uploading

uploadExcludeFile required string

UploadExcludeFile loads the file patterns to exclude from uploading from a file.

Sync-Triggered Actions

startContainer required boolean false

StartContainer will start the container after initial sync is done. This will inject a devspacehelper into the pod and you need to define dev.*.command for this to work.

onUpload required

OnUpload can be used to execute certain commands on uploading either in the container or locally as well as restart the container after a file changed has happened.

restartContainer required boolean false

If true restart container will try to restart the container after a change has been made. Make sure that images.*.injectRestartHelper is enabled for the container that should be restarted or the devspace-restart-helper script is present in the container root folder.

exec required object[]

Exec will execute the given commands in order after a sync operation

name required string

Name is the name to show for this exec in the logs

command required string

Command is the command to execute. If no args are specified this is executed within a shell.

args required string[]

Args are arguments to pass to the command

failOnError required boolean false

FailOnError specifies if the sync should fail if the command fails

local required boolean false

Local specifies if the command should be executed locally instead of within the container

once required boolean false

Once executes this command only once in the container's life. Can be used to initialize a container before starting it, but after everything was synced.

onChange required string[]

OnChange is an array of file patterns that trigger this command execution

Initial Sync

initialSync required string

InitialSync defines the initial sync strategy to use when this sync starts. Defaults to mirrorLocal

waitInitialSync required boolean false

WaitInitialSync can be used to tell DevSpace to not wait until the initial sync is done

initialSyncCompareBy required string

InitialSyncCompareBy defines if the sync should only compare by the given type. Either mtime or size are possible

One-Directional Sync

disableDownload required boolean false

DisableDownload will disable downloading completely

disableUpload required boolean false

DisableUpload will disable uploading completely

bandwidthLimits required

BandwidthLimits can be used to limit the amount of bytes that are transferred by DevSpace with this sync configuration

download required integer

Download is the download limit in kilo bytes per second

upload required integer

Upload is the upload limit in kilo bytes per second

polling required boolean false

Polling will tell the remote container to use polling instead of inotify

noWatch required boolean false

NoWatch will terminate the sync after the initial sync is done

file required boolean false

File signals DevSpace that this is a single file that should get synced instead of a whole directory